Bộ dụng cụ sữa chữa 168 món Facom CM.130A
| 440.JE18 | 18 | Combination wrenches 6 to 24 mm |
| 44.JE12 | 12 | Open-end wrenches 6 to 32 mm |
| 113A.10C | 1 | Adjustable wrench 10" |
| S.440AP | 29 | 1/2" sockets: 8 to 32 mm and accessories (in a case) |
| R2NANO | 38 | 1/4" sockets: 5.5 to 14 mm and accessories (in a case) |
| AN | 3 | Screwdrivers for slotted heads: 3x75 - 4x100 - 5.5x100 mm |
| ANF | 2 | Screwdrivers for slotted heads 6.5x150 - 8x200 mm |
| ANP | 3 | Screwdrivers for Phillips® PH head 0-1-2 |
| AND | 3 | Screwdrivers for Pozidriv® PZ heads no. 0-1-2 |
| A.VE | 2 | 1,000 Volt insulated screwdrivers: slotted head 4x100 - 6.5x150 mm |
| AP.VE | 2 | 1,000 Volt insulated screwdrivers: Phillips® PH 1-2 |
| AV.HT1B | 1 | Voltsage tester screwdriver 90 to 480 Volts |
| 82H.JP9A | 9 | Sleeve set of hexagonal keys: 1.5 to 10 mm |
| 89.JP8A | 8 | Torx® keys no. 10 to 45 |
| 187.18CPE | 1 | Sheathed combination pliers |
| 192.16CPE | 1 | Piano wire diagonal cutters |
| 181A.25CPE | 1 | Lockable multigrip pliers |
| 185.20CPE | 1 | Sheathed straight half-round nose pliers |
| 188.16CPE | 1 | Sheathed flat-nose pliers |
| 501 | 1 | Long-nose lock-grip pliers |
| 169A | 2 | Inside-circlip® pliers 13 - 18 |
| 167A | 2 | Outside-circlip® pliers 13 - 18 |
| 893.316 | 1 | Locking tape measure 3 m |
| 603F | 1 | Hacksaw frame |
| 668B.8 | 10 | Bimetal hacksaw blades |
| STG | 5 | Files |
| AP6X80 | 1 | Square punch |
| 200H.32 | 1 | Riveting hammer 32 mm |
| 208A.32CBA | 1 | Interchangeable-tip mallets |
| 247.G | 2 | Nail sets 2 - 4 mm |
| 249.G | 2 | Sheathed drift-punch sets: 2 - 4 mm |
| 263.18 | 1 | Chisel |
| 256.4 | 1 | Precision centre punch 4 mm |
| 840.1 | 1 | Electricians knife with wire stripper |
